Ademco Voice Chimes

["Christopher Glaeser" <cdg@xxxxxxxxxxxxx>]

The Ademco panels and voice keypads can be programmed to announce the zone
on a chime event.  Here is a comparison of the chimes.

The LYNX says "DING DING DING <word1> <word2> <word3>".  Seems pretty
reasonable.  It's what I would expect from a voice chime.

The 5828V, when attached to the LYNX, says "DING DING DING FAULT <word1>
<word2> <word3>".  Note the addition of the word FAULT.  Would prefer not to
have the word FAULT, but still seems pretty reasonable.

The 5828V, when attached to the Vista 20P/6160RF, says "DING DING DING
<word1> <word2> <word3> ... DISARMED ... NOT READY TO ARM ... DISARMED READY
TO ARM".  And, if one of the zones is currently bypassed, the message is
even longer with, "DING DING DING <word1> <word2> <word3> ... DISARMED ...
NOT READY TO ARM ... DISARMED READY TO ARM ... BYPASS".

Now that's an annoying voice chime. Is possible to program the Vista
20P/5828V voice chime to work similar to the LYNX/5828V?

Best,
Christopher