Re: GEM-P3200 on/off report

["Bob La Londe" <nospam@xxxxxxxxx>]

"mleuck" <m.leuck@xxxxxxxxx> wrote in message
news:359b0318-6477-4fc9-93d8-19bd5084ed6f@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> On Oct 3, 5:45 pm, "Robert L Bass" <Sa...@xxxxxxxxxxxxxxxxxxxxx>
> wrote:
>> "proguard" wrote:
>>
>> > At GEMINI P3200 i cannot locate the address where i have to programme
>> > for open/close reporting for i.ex. user #1 at Contact ID. And also
>> > what do i have to programme? Just anyone number in order to wake up
>> > the reporting event or the specific point id user #1 open/close code?
>> > can somebody help?
>>
>> It's a bit more involved than that. I would strongly urge you to use
>> Napco's
>> "Quickloadr" software to program any of the Gemini panels, especially
>> larger
>> ones like yours. The software is a free download. If you need help using
>> it,
>> give me a call and I'll be happy to walk you through it. Napco makes an
>> inexpensive serial adaptor, called a PCI-MINI, which you need to connect
>> the
>> panel directly to your PC.
>>
>> I Googled to locate a Napco distributor in Greece and, much to my
>> surprise,
>> the first link led to a list where the first link is to my US online
>> store.
>> Checking Napco's own site however, I found the following. They can
>> provide
>> you with the PCI-MINI. Again, the software is free and if you want
>> assistance
>> using it from me, that's free too. Anyway, here's the distributor:
>>
>> Force
>> 5 Ilektras Street
>> 551-34 Thessaloniki
>> Greece
>> Tel: +30 (23) 10805180
>> Fax: +30 (23) 10805387http://store.force.gr
>>
>> If they can't or won't help, let me know. I don't take small, overseas
>> orders
>> but if you pay the shipping I can send you one. They cost about US$25 or
>> so
>> retail. I'd rather you buy it locally but if you can't give me a call.
>>
>> --
>>
>> Regards,
>> Robert L Bass
>
> Why go to all that trouble when you could easily walk him through
> keypad programming, assuming you CAN do that

It's a pain because O/C reporting is turned on per user.  You turn on
opening per user, and then your turn on closing per user.  Also the address
programming for Napco panels is a little strange to start with.