Re: GEM-P3200 on/off report

[mleuck <m.leuck@xxxxxxxxx>]

On Oct 3, 10:25=A0pm, "Bob La Londe" <nos...@xxxxxxxxx> wrote:
> "mleuck" <m.le...@xxxxxxxxx> wrote in message
>
> news:359b0318-6477-4fc9-93d8-19bd5084ed6f@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
>
>
> > On Oct 3, 5:45 pm, "Robert L Bass" <Sa...@xxxxxxxxxxxxxxxxxxxxx>
> > wrote:
> >> "proguard" wrote:
>
> >> > At GEMINI P3200 i cannot locate the address where i have to programm=
e
> >> > for open/close reporting for i.ex. user #1 at Contact ID. And also
> >> > what do i have to programme? Just anyone number in order to wake up
> >> > the reporting event or the specific point id user #1 open/close code=
?
> >> > can somebody help?
>
> >> It's a bit more involved than that. I would strongly urge you to use
> >> Napco's
> >> "Quickloadr" software to program any of the Gemini panels, especially
> >> larger
> >> ones like yours. The software is a free download. If you need help usi=
ng
> >> it,
> >> give me a call and I'll be happy to walk you through it. Napco makes a=
n
> >> inexpensive serial adaptor, called a PCI-MINI, which you need to conne=
ct
> >> the
> >> panel directly to your PC.
>
> >> I Googled to locate a Napco distributor in Greece and, much to my
> >> surprise,
> >> the first link led to a list where the first link is to my US online
> >> store.
> >> Checking Napco's own site however, I found the following. They can
> >> provide
> >> you with the PCI-MINI. Again, the software is free and if you want
> >> assistance
> >> using it from me, that's free too. Anyway, here's the distributor:
>
> >> Force
> >> 5 Ilektras Street
> >> 551-34 Thessaloniki
> >> Greece
> >> Tel: +30 (23) 10805180
> >> Fax: +30 (23) 10805387http://store.force.gr
>
> >> If they can't or won't help, let me know. I don't take small, overseas
> >> orders
> >> but if you pay the shipping I can send you one. They cost about US$25 =
or
> >> so
> >> retail. I'd rather you buy it locally but if you can't give me a call.
>
> >> --
>
> >> Regards,
> >> Robert L Bass
>
> > Why go to all that trouble when you could easily walk him through
> > keypad programming, assuming you CAN do that
>
> It's a pain because O/C reporting is turned on per user. =A0You turn on
> opening per user, and then your turn on closing per user. =A0Also the add=
ress
> programming for Napco panels is a little strange to start with.

A little strange? That's an understatement