Re: GEM-P3200 on/off report

[Jim Rojas <jrojas@xxxxxxxxxxxx>]

Bob La Londe wrote:
> "mleuck" <m.leuck@xxxxxxxxx> wrote in message
> news:359b0318-6477-4fc9-93d8-19bd5084ed6f@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> On Oct 3, 5:45 pm, "Robert L Bass" <Sa...@xxxxxxxxxxxxxxxxxxxxx>
>> wrote:
>>> "proguard" wrote:
>>>
>>> > At GEMINI P3200 i cannot locate the address where i have to programme
>>> > for open/close reporting for i.ex. user #1 at Contact ID. And also
>>> > what do i have to programme? Just anyone number in order to wake up
>>> > the reporting event or the specific point id user #1 open/close code?
>>> > can somebody help?
>>>
>>> It's a bit more involved than that. I would strongly urge you to use
>>> Napco's
>>> "Quickloadr" software to program any of the Gemini panels, especially
>>> larger
>>> ones like yours. The software is a free download. If you need help
>>> using it,
>>> give me a call and I'll be happy to walk you through it. Napco makes an
>>> inexpensive serial adaptor, called a PCI-MINI, which you need to
>>> connect the
>>> panel directly to your PC.
>>>
>>> I Googled to locate a Napco distributor in Greece and, much to my
>>> surprise,
>>> the first link led to a list where the first link is to my US online
>>> store.
>>> Checking Napco's own site however, I found the following. They can
>>> provide
>>> you with the PCI-MINI. Again, the software is free and if you want
>>> assistance
>>> using it from me, that's free too. Anyway, here's the distributor:
>>>
>>> Force
>>> 5 Ilektras Street
>>> 551-34 Thessaloniki
>>> Greece
>>> Tel: +30 (23) 10805180
>>> Fax: +30 (23) 10805387http://store.force.gr
>>>
>>> If they can't or won't help, let me know. I don't take small,
>>> overseas orders
>>> but if you pay the shipping I can send you one. They cost about US$25
>>> or so
>>> retail. I'd rather you buy it locally but if you can't give me a call.
>>>
>>> --
>>>
>>> Regards,
>>> Robert L Bass
>>
>> Why go to all that trouble when you could easily walk him through
>> keypad programming, assuming you CAN do that
>
> It's a pain because O/C reporting is turned on per user.  You turn on
> opening per user, and then your turn on closing per user.  Also the
> address programming for Napco panels is a little strange to start with.

I agree. I would rather do it using Quickloader.

Jim Rojas