[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Help needed - Vista-20P sets to Fault every time I trip door sensor.

Subject: Re: Help needed - Vista-20P sets to Fault every time I trip door sensor.
From: Roger W <allucan8@xxxxxxx>
Date: Sun, 8 Mar 2009 19:49:57 -0700 (PDT)
Newsgroups: alt.security.alarms
References: <cd061336-817f-4137-a68f-ad3ccdf396f7@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <d2339ecf-b0e5-4460-954c-662585f7c43d@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <4dQsl.75390$rb1.24655@xxxxxxxxxxxx>

On Mar 8, 10:01=A0am, Jim Rojas <jro...@xxxxxxxxxxxx> wrote:
> Also check to see if you mounted the sensor upside down...I have done
> that a few times myself. If you open the transmitter, you will see the
> glass reed switch on the side. Ademco has marks on the outside of the
> transmitter for proper alignment. Sometimes the serial number label
> cover those alignment marks.
>
> Jim Rojas


If you install the transmitter upside down, does that mean that you
have to install the receiver upside down as well?

RW

Follow-Ups:
- Re: Help needed - Vista-20P sets to Fault every time I trip door sensor.
  - From: Jim Rojas

References:
- Help needed - Vista-20P sets to Fault every time I trip door sensor.
  - From: ymg200
- Re: Help needed - Vista-20P sets to Fault every time I trip door sensor.
  - From: nick markowitz
- Re: Help needed - Vista-20P sets to Fault every time I trip door sensor.
  - From: Jim Rojas

Prev by Message: Re: WTF
Next by Message: Re: Ademco LYNX RI LYNXR-I
Previous by thread: Re: Help needed - Vista-20P sets to Fault every time I trip door sensor.
Next by thread: Re: Help needed - Vista-20P sets to Fault every time I trip door sensor.
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home