Re: Aritech GS 610 Shock Sensor

[Jim <alarminex@xxxxxxx>]

On May 5, 11:48=EF=BF=BDpm, "alarman" <nos...@xxxxxxxx> wrote:
> Jim wrote:
> > I've mentioned this here before but .... a long time ago, a DIY'er
> > called me to trouble shoot his system. He couldn't seem to isolate the
> > problem. He had wired the house while it was under construction and by
> > looking at the diagram on the door of the control panel concluded that
> > only one single wire needed to be attached to the terminal on the
> > board ...... go out to each of the contacts in a zone in series and
> > then one single wire from the last contact return to the panel ......
> > all wires behind the wall.
>
> > Try and trouble shoot THAT!
>
> Ha! Had the same thing many years ago. A doctor had installed his own Radi=
o
> Shack system, and wired it just that way. I ended up installing a proper
> system, and he's still a customer.
>

I found this guys problem .... it was one of those "butterfly takeoffs
on his sliding glass door that was dirty. But the next time he
called ...... "I was busy".....