Re: PTC protected dual battery harness

["Mark Leuck" <m..leuck@xxxxxxxxx>]

"Just Looking" <nospam@xxxxxxxxxx> wrote in message
news:47eedeac$0$17363$4c368faf@xxxxxxxxxxxxxxxxx
> News to DSC? I don't think so.
> It is right in their installation manual.
>
> (From the old Power Series manual)
> Auxiliary Power Terminals - AUX+ and AUXThese
> terminals provide up to 550 mA of additional current at
> 12 VDC for devices requiring power. Connect the positive side
> of any device requiring power to the AUX+ terminal, the negative
> side to AUX- (ground). The AUX output is protected. This
> means that if too much current is drawn from these terminals
> (such as a wiring short), the panel will temporarily shut off the
> output until the problem is corrected.
>
> (From the new Power Series manual)
> The control panel can provide a maximum of 700mA of current for modules,
> powered detectors, relays, LED's etc.

Last I checked 550mA and 700mA wasn't 1A


>
>
> "Mark Leuck" <m..leuck@xxxxxxxxx> wrote in message
> news:47ee98ce$0$1091$4c368faf@xxxxxxxxxxxxxxxxx
> >
> > "Roland Moore" <nospam@xxxxxxxxxx> wrote in message
> > news:47edde8d$0$22822$4c368faf@xxxxxxxxxxxxxxxxx
> > > Come on man. It's a DSC panel. They just barely have their power out
up
> to
> > 1
> > > AMP for the first time in the new "Power" series panels.
> >
> > That'll be news to DSC
> >
> >
>
>