Re: Dual Tech motion detectors with dual relay outputs ?

["Robert L Bass" <RobertLBass@xxxxxxxxxxx>]

Hi Marc,

If you don't mind tapping the LED circuit that's probably going to be your best bet other than separate detectors.  Rokonet is not
the only brand with separate LEDs for PIR, µWave and alarm.

Visonic's K-980D has an LED indicator that you might find more useful.  The green LED flashes to indicate PIR trip and comes on
steady for µWave trip.  The red LED and the relay activate for alarm (PIR + µWave).  Here's a URL:
http://www.bassburglaralarms.com/product_4119_detailed.htm

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
941-925-8650
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
=============================>

"Marc_F_Hult" <MFHult@xxxxxxxxxxxxxxxxxxxxx> wrote in message news:cl6hc39pp23d9jph7pnup5tvpkh1qsqp5k@xxxxxxxxxx
>
> I'm looking for PIR + microwave (dual tech) motion detectors that separate
> have outputs for both the PIR and microwave detectors. It would be OK for
> the microwave not to be energized until after the PIR detects motion (in
> other words, the two outputs could be PIR and (PIR+uWave) rather than PIR
> and uWave).
>
> My application is for using the same device for both lighting path
> automation (which needs to be fast but which for false detections are not a
> major problem) and intrusion security (for which immunity from false
> detection is important).
>
> The closest I've found are some Rokonet iWISE detectors
>
> http://www.riscogroup.com/Products.aspx?subcatid=152&id=12
>
> that have "Green Line for disabling the MW when the building is occupied"
> and  separate LEDs for walk-testing that might allow me to solder on
> comparators to close relays when the LEDs light. I'd prefer something
> pre-built though.  Two separate NO or NC relays would be ideal.
>
> Any suggestions ?
>
> TIA ... Marc
> Marc_F_Hult
> www.ECOntrol.org