Re: DSC MD12 modem connection problems

["Mark Leuck" <m..leuck@xxxxxxxxx>]

Yup, strangely enough I only use an MD12 on Paradox panels

"Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
news:46b9db73$0$30611$4c368faf@xxxxxxxxxxxxxxxxx
> I use the Cardinal MB2400EX, Securcomm DL110, Hayes 1200 07-000038 &
> Practical Peripherals PM1200SA Mini. I tossed the MD12 a while ago.
>
> Jim Rojas
>
>
>
> Buggs wrote:
> > tourman wrote:
> >> I experience the same problem continually when dialing in on a non DSL
> >> line as well. I also know my partner has the same problem when dialing
> >> in to his panels on a rural line. DSC tech support's only suggestion
> >> is to make sure we have the latest drivers for the DSL software, but
> >> can't offer any real assistance past that point.
> >>
> >> In most instances, the panel will answer but the software gives the
> >> message "cannot identify panel". In others, the panel answers, but the
> >> line degrades to such a point that the panel finally hangs up (green
> >> line goes yellow, then recedes before hanging up).
> >>
> >> This happens with either of two different MD12 modems that I have, so
> >> I doubt it is a defective modem. It's a real PITA.!!  If you solve it,
> >> let me know. I've lived with this problem for years....
> >
> > I have seen the line degradation issue a few times, and it seems to
occur
> > most often when downloading text to LCD keypads. I'm using a Hayes
Optima
> > 2400 though, so it's not just the MD-12.
> > js
> >
> >