Re: Ademco 998PI - detects motion but no alarm

["JOhn" <johnny2@xxxxxxxxxxx>]

When you arm it "away" do you open/close  the exit door?  If now, the system
knows you havent left and arms in "stay" mode
"Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:46895f70$0$3576$815e3792@xxxxxxxxxxxxxxxxx
> Yes...you'll need to program that motion detector into the system on
> whatever zone you wired it to in the panel. Yes...installer manual and
> installer code and keypad that can get into zone programming (the cheap
> keypads can only program part of the system, not the zones)... 6139 or
> 6150
> (i think).
>
>
> "SmithRan" <mantram@xxxxxxxxx> wrote in message
> news:1183385894.487320.278800@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> |
> | Do you have it programmed as an Interior Follower?   No - i guess i
> | have to go through installer manuals for figuring this out...?
> | Are you arming the system Away?   Yes - armed it as away, and it
> | alarms when any door is opened but not on any motion sensation
> | Are you letting the system fully arm?  Yes - waiting for like 20-30
> | seconds for all the noises to end and the system to say 'Away'.
> | Does the keypad display that zone when the motion is faulted...probly
> | not or maybe?  - I dont think so - its as if that the main board
> | doesnt realize that motion has been trigerred.
> |
> | Thanks for taking time to ask about the problem.
> |
> | On Jul 2, 1:19 am, "Crash Gordon" <webmas...@xxxxxxxxxxxxxxxxxxxxx>
> | wrote:
> | > Do you have it programmed as an Interior Follower?
> | > Are you arming the system Away?
> | > Are you letting the system fully arm?
> | > Does the keypad display that zone when the motion is faulted...probly
> not or
> | > maybe?
> | >
> | > "SmithRan" <mant...@xxxxxxxxx> wrote in message
> | >
> | > news:1183350873.204732.285980@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> | > |I have installed a Ademco 998PI/998EXPI unit. it detects motion fine
> | > | (LED glows on any motion) - but does not trigger an alarm.. is there
> | > | some pet sensitivity threshold I can adjust? Or something else which
> | > | is causing the problem?  When I open doors the alarm works fine. I
> | > | have a Ademco Vista-10SE unit.
> | > |
> |
> |
>
>