[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DSC PC5010 Battery Low Error

What else could be wrong?


Frank Olson wrote:
> mikee wrote:
>
> > The current draw on the aux power terminals is 12.16 VDC.
>
> That's "voltage", not "current".
>
>
> > The bell
> > terminal is 1 VDC.   The terminals connected to the battery reads 12.17
> > VDC.
>
> Charging voltage is a bit on the low side.  It should be around 13.6 - 13.8.
>
>  > The terminals to power the board from the transformer reads 17.89
> > VAC.
>
> That's actually good.
alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home