[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DSC PC5010 Battery Low Error

Subject: Re: DSC PC5010 Battery Low Error
From: Frank Olson <Use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx>
Date: Sun, 03 Sep 2006 01:05:44 GMT
Newsgroups: alt.security.alarms
References: <1157206777.437129.202630@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <UTgKg.494595$Mn5.234479@pd7tw3no> <1157221306.938212.57970@xxxxxxxxxxxxxxxxxxxxxxxxxxx>

mikee wrote:

> The current draw on the aux power terminals is 12.16 VDC.

That's "voltage", not "current".

> The bell
> terminal is 1 VDC.   The terminals connected to the battery reads 12.17
> VDC.

Charging voltage is a bit on the low side.  It should be around 13.6 - 13.8.

 > The terminals to power the board from the transformer reads 17.89
> VAC.

That's actually good.

Follow-Ups:
- Re: DSC PC5010 Battery Low Error
  - From: mikee

References:
- DSC PC5010 Battery Low Error
  - From: mikee
- Re: DSC PC5010 Battery Low Error
  - From: Frank Olson
- Re: DSC PC5010 Battery Low Error
  - From: mikee

Prev by Message: Re: New house system recomendation
Next by Message: Re: 15 sec dialer delay
Previous by thread: Re: DSC PC5010 Battery Low Error
Next by thread: Re: DSC PC5010 Battery Low Error
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home