[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
DSC PC5010 Battery Low Error
I have been stumped on this for a long time. A while back, my keypad
gave me an error message, battery low. I had changed my battery for a
new one and the error went away. Exactly 1 week later the error
message came back up. I checked the battery, and it was down to 10
volts. Not soon afterwards my board went bad. I had my alarm
installer replace my board with a new one. I had hooked up my battery
to a battery charger that I had and charged it back up to 13 volts. I
placed the battery back in the cabinet, again exactly one week later I
had the low battery light come on again. At that point, I thought my
transformer might be on the blink, so I bought a new DSC transformer.
I had taken the battery out again and recharged it on a battery charger
again. I put it back in. again exactly one week later the low battery
light came on again. I thought at this point that my battery may have
been screwed up from charging it on a seperate battery charging unit,
I went ahead and bought a new battery again. I now have a new PC5010
board, a new transformer, and a new battery, one week later the
battery low error popped up again!!, I checked the VAC on the leds
coming from the PC5010 board and I get about 13.5 volts. I checked the
battery itself and I get 10 volts, I connect the leads to the battery,
and I get a total of 10 volts.
What the hell is going on here? why can't I get this damm thing
charged?? please help!!
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home