[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Fire Alarm Signal Xmission

Subject: Re: Fire Alarm Signal Xmission
From: "Nick Markowitz" <nick-markowitz@xxxxxxxxxxx>
Date: Thu, 02 Feb 2006 00:31:07 GMT
Newsgroups: alt.security.alarms
References: <1138838233.508387.323280@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

For safety sake the t1 channel bank should have the required 24-60 hors
battery back up you would follow if it was thru a pbx  the nfpa codes have
not caught up to modern communication techniques.

Also note be careful to check and make sure your format is transmitting Ok
many times you need to switch to contact id or SIA as 3/1 and 4/2 formats
will not always transmit correctly thru a channel bank i have had this
problem especially with choice one service

Follow-Ups:
- Re: Fire Alarm Signal Xmission
  - From: Crash Gordon

References:
- Fire Alarm Signal Xmission
  - From: jewellfish

Prev by Message: Re: Need Advice For Packaged Home Alarm Purchase
Next by Message: Re: Need Advice For Packaged Home Alarm Purchase
Previous by thread: Fire Alarm Signal Xmission
Next by thread: Re: Fire Alarm Signal Xmission
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home