Re: I printed my DLS log file. Help.

["Doug L" <vssdoug@xxxxxxx>]

The DLS printout shows a device on zone 1 not zone 5
How are you testing the device?
You should do * 904 then the two digit zone number then open/close the zone

Doug

--

"Larry Lipide" <lpide@xxxxxxxxxxx> wrote in message
news:xoqBg.19423$Nv.12274@xxxxxxxxxxxxx
>I hear but I will try and give the company one more try tomorrow.  It has
>to be bad equipment because I went through the process step by step.  I
>mean, I also can now look at everything useing DLS.  If you default the
>entire system out of the box, then log in, change all default zones 1-6 to
>wireless, enroll the contact with the ESN under zone 5 and then go to 904
>to test the contact it should work.  I mean it using the default settings
>with literally one change to the definition and the addition of an ESN.
>
> Thanks anyway.
>
>
> "Frank Olson" <Use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx> wrote in
> message news:7YpBg.323137$iF6.229684@xxxxxxxxxxx
>> Larry Lipide wrote:
>>> There is a guy who put the PC Link cable instructions on the web site.
>>> Just went to Radio Shack and it was easy to build.  Obviously not so on
>>> the alarm instructions.
>>
>>
>> Check.  It's frustrating not knowing what you're doing.  Sort of like
>> trying to adjust the dwell on a car with electronic ignition.  Some
>> online parts vendors will tell you it's "easy" - that anyone with a
>> modicum of tool skills can do it - and "wham" you find you need to be a
>> little more knowledgable than you are...  Save yourself some frustration.
>> Call up a local dealer and have them help you program your system.
>> You'll probably pay about the same dollars as you would sending the
>> product back.
>
>