[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Need help with DoorKing component identification

Subject: Need help with DoorKing component identification
From: justinbboyd@xxxxxxxxx
Date: 21 Apr 2006 09:43:54 -0700
Newsgroups: alt.security.alarms

I've got a DoorKing 1871-010 module with a burned resistor at location
R18 on the board.  The resistor is burned bad enough that I can't tell
what it's value is.  If anyone has one of these units and can look at
R18, that would be great.


R18 is located in the bottom left area of the board if you hold the 18
pin connector on the left and the 8 pin connector at bottom right.

Thanks.

Follow-Ups:
- Re: Need help with DoorKing component identification
  - From: coord
- Re: Need help with DoorKing component identification
  - From: Robert L Bass

Prev by Message: DLS-2002 Unsupported Modem Patch?
Next by Message: Re: Salesman Compensation
Previous by thread: Re: Own car alarm system
Next by thread: Re: Need help with DoorKing component identification
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home