Re: Motion Detector Ademco 998IP

["Stanley Barthfarkle" <sbarth@xxxxxxxxx>]

Blew a fuse. 25 cent part, 10 seconds to replace, once you know where it is.
What brand/model alarm do you have? (Hint: find the metal enclosure which
contains all the alarm wires, look on the outside, then look on the inside
for identifying labels.)


"Sbg via HomeKB.com" <u21234@uwe> wrote in message news:5f5d134911c4d@xxxxxx
>I should have paid an installation professional for this. When switching
>the
> motion detector, the whole system has shut down. No lights or anything. I
> must have blown a resistor or something. If there is no simple solution
> that
> anyone may know of, I'll get some help.
> Thanks for trying.
> Regards
> Steven
>
> FIRETEK wrote:
>>Seems to me that you've answered your own question but have the wiring
>>sequence wrong.  If you have a volt meter, put the positive lead from it
>>on
>>the red wire and the negative lead on the black.  If' your reading a
>>positive 12 VDC then the correct wire sequence should be:  Black, Red,
>>White, Green (from top to bottom).
>>
>>Regards,
>>Frank
>>(No, not that "Frank".  The other one.)
>>
>>> I just got an Ademco 998IP motion detector and I need to know the color
>>> sequence of the 4 wires. I am replacing an old one that is broken   The
>>> old
>>[quoted text clipped - 4 lines]
>>> Thanks
>>> Steven
>
> --
> Message posted via HomeKB.com
> http://www.homekb.com/Uwe/Forums.aspx/security-alarms/200604/1