Re: 5540 Silent Knight Software Question

["Bill" <simard@xxxxxxxxxxxx>]

If all else fails I'm going to use the modem on another line and call
manually from a phone before I trigger the alarm.
This will make the modem and panel work as intended just to a different
phone number.
I pray that will work.

"Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:2ODWe.6$8x5.808@xxxxxxxxxxxxxxxxxx
> Modem's not gonna produce a dialable dial tone.
> Viking makes one...around a 100 bucks I think.
>
> I'm not sure you're gonna get your scheme to work though. Interesting
> experiment I suppose. Let us know!
>
>
>
>
>
> "Bill" <simard@xxxxxxxxxxxx> wrote in message
> news:432aee2b$0$13473$5ec1c3@xxxxxxxxxxxxxxxxxxxxxx
> | The modem doesn't produce the tone needed?  Where can I get a tone
> | simulator?
> |
> |
> | "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
> | news:kVBWe.5$8x5.768@xxxxxxxxxxxxxxxxxx
> | >I doubt you will get it to work.
> | >
> | > You may want to try a dial tone simulator between the panel and the
> | > software.
> | >
> | >
> | >
> | > "Bill" <simard@xxxxxxxxxxxx> wrote in message
> | > news:432ab8d6$0$13562$5ec1c3@xxxxxxxxxxxxxxxxxxxxxx
> | > | Yes, I am trying to do an upload, but I need to know the account
> number
> | > to
> | > | request an upload.
> | > | I don't have the account number.  The software will accept calls
> from
> | > any
> | > | panel and log the alarm.
> | > | If I can get it to connect then it would log the account number as
> well
> | > as
> | > | the alarm and the
> | > | software would tell the panel to call back in 15 minutes.
> | > | I could then select that account from the list and tell the
> software,
> | > the
> | > | next time this account calls upload the panels eeprom
> | > | to the computer.  I know this would work if the panel was calling
> over
> a
> | > | standard phone line, but since I can't get into the
> | > | programming mode, I can't change the number it calls.  It was
> | > recommended
> | > | that I let the panel call out, then unplug the phone line and use a
> | > regular
> | > | phone to dial the number I want , then plug the alarms phone jack
> back
> | > in
> | > | when it starts ringing.  I'm not sure if that would work either.
> | > | Any thoughts?
> | > |
> | > | Bill
> | > | simard@xxxxxxxxxxxx
> | > |
> | > | "Doug L" <vssdoug@xxxxxxx> wrote in message
> | > | news:x4SdnTWTtO1VILfeRVn-iw@xxxxxxxxxxxxxxx
> | > | > My guess is that nothing will happen other than a communication
> | > failure,
> | > | > while not being familiar with the software or the panel in
> question,
> | > it
> | > | > sounds like you are trying to use a upload/download package to
> | > | > transmit/receive alarm signals.
> | > | >
> | > | > Doug L
> | > | > --
> | > | >
> | > | > "Bill" <simard@xxxxxxxxxxxx> wrote in message
> | > | > news:432a7c19$0$13523$5ec1c3@xxxxxxxxxxxxxxxxxxxxxx
> | > | >>I am planning on connecting straight to the panel using the 5530
> | > modem.
> | > | >> When an alarm is triggered the panel normally dials the number
> | > programmed
> | > | >> to report the alarm.
> | > | >> What will happen now that the modem is plugged into the panels
> phone
> | > | >> jack?
> | > | >> Will it still try to dial?  Will the modem just ignore the panels
> | > dialing
> | > | >> and send the connect tones?
> | > | >>
> | > | >> Thanks for the help.
> | > | >>
> | > | >> Bill
> | > | >> simard@xxxxxxxxxxxx
> | > | >>
> | > | >>
> | > | >>
> | > | >>
> | > | >> http://www.USENETHOST.com 100% Uncensored , 100% Anonymous,
> 5$/month
> | > | >> Only!
> | > | >
> | > | >
> | > |
> | > |
> | > |
> | > |
> | > | http://www.USENETHOST.com 100% Uncensored , 100% Anonymous,
> 5$/month
> | > Only!
> | > |
> | >
> | >
> |
> |
> |
> |
> | http://www.USENETHOST.com 100% Uncensored , 100% Anonymous,  5$/month
> Only!
> |
>
>




http://www.USENETHOST.com 100% Uncensored , 100% Anonymous,  5$/month  Only!