Re: Ademco:PanelDumpsCentralStation

[<thesatguy1@xxxxxxxxxxxxx>]

The password is wrong and the panel will hang up every time.

"Don" <dgp0@xxxxxxxxxxxxx> wrote in message
news:1128216006.581040.242190@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Hello to All,
> 01 Problem: Ademco 50P panel dumps central station immediately after
> answering their dial in for setup.
>
> 02 Background: self-installed.  1 Ademco 50p panel; 1 12-volt, 7-amp
> battery at auxiliary power; 1 4208U expansion cards, currently.
>
> 03 Currently connected: 2 2-wire heat, 1 4-wire CO, 12 4-wire smokes.
> 10K EOL resistors are wired at each detector rather than in the panel
> and expansion card. The first 8 detectors are wired directly to the
> panel, jumper wired at zone 9,  next 7 (10-16) to the expansion.
>
> No problem indicated at keypad.
>
> 04 I may have programmed something at the keypad called Jumper. I have
> to find it again.
>
> 05  My panel is in New York City. Called internet monitoring service,
> central station in California.  Programmed their numbers while they
> instructed over separate telephone line.  When they dial into the
> Vista-50p over its own hardwired, dedicated telephone line, the panel
> seems to negotiate with their modem then immediately hangs up.
>
> NY telco says the line is noiseless which it does seem to be.  Ademco
> dialed in at request of central station and said the communicator was
> bad.  I bought and installed a whole new panel! Problem persisted.
> Local installer said I had to use an RJ31X so I installed one.  Problem
> still persists.  Central Station never heard of this problem.  Three
> local installers also never heard of it.  Ademco/Honeywell will not
> talk to me.
>
> I am up against a deadline from my insurer to have this system
> monitored.
>
> Any and all help is appreciated... and desperately needed.
>
> TIA
>
> Don
>