Re: Radionics D7212B1 Panel Help

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

Not the panel, I'm talking about the person who owns the panel

I love it when they say "I'm handy with a soldering iron..", big whoop!

Not gong to do jack on IC circuitry and it won't get the panel programmed,
it just means they are handy with a soldering iron

"Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
news:QFC6f.656$585.132@xxxxxxxxxxx
> It's not that bad... :)
>
> Jim Rojas
>
> "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
> news:x7qdnYANHKB7acfeRVn-1w@xxxxxxxxxxxxxx
> > Oh god walk away from it please........
> >
> > "WYSIWYG" <nospam@xxxxxxx> wrote in message
> > news:kcC6f.1255$8W.22@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> >> Crash,
> >>
> >> Thanks for the reply.
> >> I'm pretty handy with a soldering iron so I think the board hardware is
> > OK.
> >> Really depends on Radionics' software design as to if any "magic" needs
> >> to
> >> be retained in the RAM to make things work. If so, I'm sure it was
blown
> >> away years ago.
> >>
> >> So I understand I must have a 5200 programmer to initialize the board?
> >> I see 5200 programmers on sale on ebay all the time. What "product
> > handlers"
> >> would I need to fully program the board?
> >> Are there no other tools to program these boards?
> >> Is the command set to the board documented anywhere?
> >> Is it normal that an uninitialized board would not talk to a D1255
> >> controller? If I get it talking to the controller, can I program
> > everything
> >> from it?
> >>
> >> While I'm firing off questions, I also purchased a few OCTPOPITS
D8128A.
> > The
> >> documentation is contradictory regarding which versions of these A,B,C,
> >> or
> > D
> >> are compatible with this panel. What were the differences between these
> >> revisions?
> >>
> >> Sorry for all the questions. I'm eager to get this thing working.
> >>
> >> Thanks again for any help.
> >>
> >> Bob
> >
> >
>
>