Re: Question about Napco 8-zone expander

["Bob La Londe" <usenet@xxxxxxxxxxxxxxxxx>]

"jewellfish" <jewellfish@xxxxxxxxx> wrote in message
news:1130071694.226929.73130@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Yes, it is required to use EOLRs on that module for unused zones and
> all zones, for that matter, unless you reconfigure the zones in PCD
> software.  If you configure them as "No EOL required" then you can
> simply use a jumper across the unused zones.  I do not beleive that
> this programing option can be done from the keypad.
>
> Regards

It can be done from address programming.  Not from quick mene programming
though.




> Crash Gordon wrote:
>> I know some panels (dunno abt Napco as I'm not partial to them) if you
>> program the zone out and don't put a eol on when you remotely view status
>> of
>> the panel/zone it will show as open or trbl...which confuses the hell
>> outta
>> me, so I always put eols on unused zones.
>>

You can program to not hsow in any partitions, but as Crash said it still
shows when viewing remotely or via laptop and cna be confusing.


--
Bob La Londe

Cheapskate's Ways to Do Fishing Stuff
(The Frugal Fisherman)
Through the Month of October 2005

http://www.YumaBassMan.com