Re: Kantech EntraPass

["petem" <petem001@xxxxxxxxx>]

OK now you are playing with fire..

The port used by the software are:

Port SERVER 18000
Port WORKSTATION 18101
Port WORKSTATION GATEWAY 18102
port GATEWAY 18103
port SMARTLINK (network) 18204   dll smartlink 18200
port EPConnect 18112
Protocol TCPIP


those are the port used at the software to listen in..

so at the server site you need to open from the exterior toward the server
port 18000 tcp
out from the server site toward the workstation port 18101 tcp

out from the workstation site port 18101 and in from the exterior post 18101
all tcp

one other thing to know..when registering the workstation to the server the
epconnect port must be open at the server site to accept connection from the
exterior on port 18112 tcp

i just don't remember right now ( don't have all my documentation with me)
if it need to be open all the time...(the 18112 port)

hope it will help a bit..




"A.J." <aj@xxxxxxxx> a écrit dans le message de news:
0Ze4f.209830$tl2.56963@xxxxxxxxxxx
> Corporate Edition, need to know the various option for remote workstation
> connection.
>
> Both workstation and server are located behind corporate firewall located
> in two different organisation. Need to find out the ports to open at the
> workstation location as well as the server location, or is it just simpler
> to accomplish with VPN ? If dealing with VPN, which ports will need to be
> opened at either location ? I am doing some test right now with the
> software and sort of figured out the ports that they are using, both
> incoming and outgoing at the workstation location, but it will save me a
> lot of work if I have the correct settings from people who has done this
> before.
>
>
> Kantech support said it's up to the I.T. to figure it out, and I.T. said
> they can't do anything unless they have specs from Kantech regarding the
> software connection, and in the mean time bosses from both organisation
> are getting mad at us for wasting their staff time etc. etc.
>
>
> Thanks ..
>
>
> "petem" <petem001@xxxxxxxxx> wrote in message
> news:Ceb4f.30961$Tn2.683438@xxxxxxxxxxxxxxxxxxxxxx
>> witch version?global or corporate..(special edition cant have remote gui)
>>
>> I train other tech on it maybe I can help
>>
>> whets your problem?
>>
>>
>>
>>
>> "A.J." <aj@xxxxxxxx> a écrit dans le message de news:
>> 7u_3f.193109$1i.21055@xxxxxxxxxxx
>>> Looking for people who has set up remote work station access with this
>>> software.
>>>
>>>
>>>
>>
>>
>
>