[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Datalogger to Test False Alarms on Sensor

Subject: Re: Datalogger to Test False Alarms on Sensor
From: "Robert L Bass" <robertlbass@xxxxxxxxxxx>
Date: Sat, 1 Oct 2005 19:54:39 -0400
Newsgroups: alt.security.alarms
References: <j6idnUXrNpwUUaPeRVn-tA@xxxxxxxxxxxx> <%QC%e.72$Mx2.7763@xxxxxxxxxxxxxxx> <j46dnSQuM6LXl6LeRVn-2w@xxxxxxxxxxxx> <sxE%e.41917$tl2.38974@pd7tw3no> <GcydnVyHTbdDgqLeRVn-pQ@xxxxxxxxxxxx>

>> What alarm panel is the motion sensor connectd to??
>
> Ademco 128BP

You don't need a data logger.  The panel keeps a record of events.  Assign
the zone to an unused partition with no siren output.  Configure the zone to
be armed 24-hours.  Check the history after a few days.

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
2291 Pine View Circle
Sarasota · Florida · 34231
941-925-9747 Sales & Tech Support
http://www.bassburglaralarms.com
=============================>

Follow-Ups:
- Re: Datalogger to Test False Alarms on Sensor
  - From: Will

References:
- Datalogger to Test False Alarms on Sensor
  - From: Will
- Re: Datalogger to Test False Alarms on Sensor
  - From: Crash Gordon
- Re: Datalogger to Test False Alarms on Sensor
  - From: Will
- Re: Datalogger to Test False Alarms on Sensor
  - From: Frank Olson
- Re: Datalogger to Test False Alarms on Sensor
  - From: Will

Prev by Message: Re: Ademco:PanelDumpsCentralStation
Next by Message: Re: DMP Hoovers
Previous by thread: Re: Datalogger to Test False Alarms on Sensor
Next by thread: Re: Datalogger to Test False Alarms on Sensor
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home