Re: Anyone use Honeywell 7845 AlarmNet Cellular backup?

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

"Jim" <alarminex@xxxxxxx> wrote in message
news:1131555765.857513.64140@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> Mark Leuck wrote:
> > "Jim" <alarminex@xxxxxxx> wrote in message
> > news:1131515389.142448.163030@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > >
> > > When using cellular backup with Napco panels I always use the 3008
> > > relay panel. This way I can send different siganls for fire, burg,
> > > panic, duress, and telephone failure.
> > > I also trip the 3200 if the cell fails too.
> > >
> > > If you're going to use the 3008 make sure you get the unit in the
metal
> > > box. You can order it board only, but it just doesn't fit in the 3200
> > > panel along with everything else.
> >
> > That wouldn't work with the 7845C, Uplink yes
>
> Hmmm! you're right. I wouldn't use the C version. If you're going to
> have a back up reporting device, and it only sends two signals, ( three
> if you use the fault relay output)and someone cut the phone lines and
> then invaded the house ....... the home owner presses the panic button
> and is sends a burglary signal?
>
> Nah!
>
> For the small additional cost use the CZ version along with the 3008
> relay box. It doesn't send every zone but breaks it up into back up
> signals that have some meaning.

I believe with the CZ you also have to have a 4219 zone expander to get
those zones and depending on the zone it will send it may send a burg signal
instead of a panic but since it would be in 4/2 format you can define it
anyway you want