Re: Power 832 "Low Battery" Error

[<thesatguy1@xxxxxxxxxxxxx>]

You need a large amp battery - probably at least 30 amp hr - when you
changed the battery it was probably okay for a while until the battery
discharged and the power supply can't make up the drain so you likely need
an additional power supply and the large battery for all the addons.

"Impalpable" <spdb66@xxxxxxxxxx> wrote in message
news:1133400710.264798.182350@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> The system has one key pad, a dial in module, an autodialer, a printer
> module, and 3 motion detectors.  The motion detectors and the
> autodialer are the devices hooked into the aux power from the board.
> The dial in and printer modules are hooked to the bus.  Think this
> stuff might be drawing too much power for the board to handle ?
>