[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Power 832 "Low Battery" Error

Subject: Re: Power 832 "Low Battery" Error
From: "Impalpable" <spdb66@xxxxxxxxxx>
Date: 30 Nov 2005 17:31:50 -0800
Newsgroups: alt.security.alarms
References: <1133382197.423459.181800@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <JYydndBrJILEkxPenZ2dnUVZ_tmdnZ2d@xxxxxxxxxx> <1133383669.336764.165950@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <Sfrjf.22217$0M.2968@xxxxxxxx>

The system has one key pad, a dial in module, an autodialer, a printer
module, and 3 motion detectors.  The motion detectors and the
autodialer are the devices hooked into the aux power from the board.
The dial in and printer modules are hooked to the bus.  Think this
stuff might be drawing too much power for the board to handle ?

Follow-Ups:
- Re: Power 832 "Low Battery" Error
  - From: Frank Olson
- Re: Power 832 "Low Battery" Error
  - From: thesatguy1

References:
- Power 832 "Low Battery" Error
  - From: Impalpable
- Re: Power 832 "Low Battery" Error
  - From: R.H.Campbell
- Re: Power 832 "Low Battery" Error
  - From: Impalpable
- Re: Power 832 "Low Battery" Error
  - From: Devin

Prev by Message: Re: Your Favorite Install Tool?
Next by Message: Re: ASA re-visited
Previous by thread: Re: Power 832 "Low Battery" Error
Next by thread: Re: Power 832 "Low Battery" Error
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home