[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Help needed with programming for DSC PC2530

Subject: Re: Help needed with programming for DSC PC2530
From: "Mark Leuck" <m..leuck@xxxxxxxxxxx>
Date: Thu, 12 May 2005 21:49:30 -0500
Newsgroups: alt.security.alarms
References: <d60ss40h22@xxxxxxxxxxxxxxxxxx> <54Tge.1327018$8l.1039541@pd7tw1no> <A7ednZ67PoEXYh7fRVn-sA@xxxxxxxxxx>

"R.H.Campbell" <rh.campbell@xxxxxxxxxxxxx> wrote in message
news:A7ednZ67PoEXYh7fRVn-sA@xxxxxxxxxxxxx
> Have you actually asked ADT for assistance in this regard ? The installer
> code and lockout code are two different things. It is normal for any
company
> to change the installer code, and this code will go back to factory
> installer code for your model panel once defaulted. However, if the board
is
> locked, it won't default back to factory specs and is essentially
worthless.
> Jim Rojas on this newsgroup can assist you in this regard in unlocking
your
> board.
>
> As much as I dislike ADT and all of their practices, it is my experience
> that they don't normally lock boards. So a call to them may be all you
need
> to get the panel installer code reset.
>
> R.H.Campbell
> Home Security Metal Products
> Ottawa, Ontario, Canada
> www.homemetal.com

Can't lock a PC2530 R.H

References:
- Help needed with programming for DSC PC2530
  - From: Brian O
- Re: Help needed with programming for DSC PC2530
  - From: Frank Olson
- Re: Help needed with programming for DSC PC2530
  - From: R.H.Campbell

Prev by Message: Re: Want to move Brinks keypad
Next by Message: Re: RLB NX8E and Shabbat
Previous by thread: Re: Help needed with programming for DSC PC2530
Next by thread: Re: Help needed with programming for DSC PC2530
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home