[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Question about Brinks

Subject: Re: Question about Brinks
From: "Robert L. Bass" <robertlbass@xxxxxxxxxxx>
Date: Wed, 18 May 2005 16:05:27 -0400
Newsgroups: alt.security.alarms
References: <3ed9e158.0504150855.79717bd7@xxxxxxxxxxxxxxxxxx> <diT7e.6074$bc2.3586@xxxxxxxxxxxxxxxxxxxxxxxxxx> <d6fsf7031do@xxxxxxxxxxxxxxx> <Pe6dnQfopMezHBbfRVn-ig@xxxxxxxxxxx> <lDMie.5810$fE3.880@xxxxxxxxxxxxxxxxxxxxxx>

> Any one care to tell this gentleman about
> re-wiring his telephone line once he
> disconnects the RJ Telco jack inside the
> panel and shoves the wires back in the wall.

Does Brinks install the RJ31X inside the panel in your area, Bob.  The
Brinks systems I removed had the RJ outside the box.  You only need to
unplug the jack to disconnect the alarm.  The phone line isn't affected if
you don't have to remove the jack.

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
2291 Pine View Circle
Sarasota · Florida · 34231
877-722-8900 Sales & Tech Support
http://www.bassburglaralarms.com
=============================>

Follow-Ups:
- Re: Question about Brinks
  - From: Frank Olson
- Re: Question about Brinks
  - From: Bob Worthy

References:
- Re: Question about Brinks
  - From: Chris
- Re: Question about Brinks
  - From: Robert L. Bass
- Re: Question about Brinks
  - From: Bob Worthy

Prev by Message: Re: Sayonara, good people
Next by Message: any interest in used GYYR VCR recorders
Previous by thread: Re: Question about Brinks
Next by thread: Re: Question about Brinks
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home