Re: Want to move Brinks keypad

["Dr. Phred" <fred.spearey@xxxxxxxxxxxxx>]

Codes are retained in the panel not the keypad so you should be ok. Just
make sure you power the system down while doing this.

Tocapet wrote:
> I want to move the keypad to my Brinks system to the other side of the
> laundry room, about 6 feet away from it's present location.  I plan to
> disconnect it, pull the wire up out of the wall, thread the same wire back
> down into the opposite wall and then reconnect the keypad.  I'm wondering if
> I will run into any trouble doing this.  I would reconnect the same color
> wires where they were before.
> Would it cause my system to lose any codes?  I know Brinks would charge over
> $150 to do this, so I'm trying to do it myself.  Reason:  Just bought a new
> freezer that is now blocking access to the keypad.
>
>