Re: DSC Maxsys PC 4020 Reporting probs.

[Crash Gordon® <NONE@xxxxxxxx>]

Personally....I've never liked DSC. I have a 20-30 take-overs and I =
can't wait for them to barf so I can replace them.=20



"Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message =
news:-4-dnfWbZ-gk_OjfRVn-1A@xxxxxxxxxxxxxx
> SIA is starting to piss me off on DSC panels, they can't send a zone =
trouble
> while armed and instead send a UT which could be several things from a =
burg
> to a panic.
>=20
> Unfortunatly the older 4/2 format will never go away, just like old =
Moose
> and AT&T panels
>=20
> "Crash Gordon=AE" <NONE@xxxxxxxx> wrote in message
> news:KN6de.39$dS6.1212@xxxxxxxxxxxxxxxxxx
> <oye>
> I've been replacing old panels that don't report SIA, CID, SDLC...who =
has
> the time for the older formats these days? Sometimes even SIA pisses =
me off.
>=20
> "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
> news:E6GdnXMELN1FgenfRVn-1A@xxxxxxxxxxxxxx
> > Well this will create a lot of work but you might try switching to =
4/2
> > reporting
> >
> > <shudder>
> >
> > "Anonymoose" <none@xxxxxxxxxxxxx> wrote in message
> > news:2yPce.542$Q.487@xxxxxxxxxxxxxxxxxxxxxxxxx
> > > This one is a v3.4SX per the sticker on the chip of the board.
> > >
> > > "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
> > > news:5Oqdne55KsNdh-7fRVn-iA@xxxxxxxxxxxxxx
> > > >
> > > > "alarman" <alarman2000@xxxxxxxxx> wrote in message
> > > > news:cACce.173$D91.55@xxxxxxxxxxxxx
> > > >> A.J. wrote:
> > > >> > Have you programmed your account number into both the main
> > > >> > communicator as well as the partition ? Yes, each partition =
can
> have
> > > >> > their own account number, and you have to manually program in
> > > >> > alarm/trouble/restore codes if you are using Contact ID.
> > > >>
> > > >> No you don't, if auto report contact ID is selected.
> > > >> js
> > > >
> > > > Thats assuming the panel is capable of it, anything pre v3.3 =
won't do
> > auto
> > > > CID
> > > >
> > > >
> > >
> > >
> >
> >
>=20
>