Re: DSC Maxsys PC 4020 Reporting probs.

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

Well this will create a lot of work but you might try switching to 4/2
reporting

<shudder>

"Anonymoose" <none@xxxxxxxxxxxxx> wrote in message
news:2yPce.542$Q.487@xxxxxxxxxxxxxxxxxxxxxxxxx
> This one is a v3.4SX per the sticker on the chip of the board.
>
> "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
> news:5Oqdne55KsNdh-7fRVn-iA@xxxxxxxxxxxxxx
> >
> > "alarman" <alarman2000@xxxxxxxxx> wrote in message
> > news:cACce.173$D91.55@xxxxxxxxxxxxx
> >> A.J. wrote:
> >> > Have you programmed your account number into both the main
> >> > communicator as well as the partition ? Yes, each partition can have
> >> > their own account number, and you have to manually program in
> >> > alarm/trouble/restore codes if you are using Contact ID.
> >>
> >> No you don't, if auto report contact ID is selected.
> >> js
> >
> > Thats assuming the panel is capable of it, anything pre v3.3 won't do
auto
> > CID
> >
> >
>
>