Re: DSC Maxsys PC 4020 Reporting probs.

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

SIA is starting to piss me off on DSC panels, they can't send a zone trouble
while armed and instead send a UT which could be several things from a burg
to a panic.

Unfortunatly the older 4/2 format will never go away, just like old Moose
and AT&T panels

"Crash Gordon®" <NONE@xxxxxxxx> wrote in message
news:KN6de.39$dS6.1212@xxxxxxxxxxxxxxxxxx
<oye>
I've been replacing old panels that don't report SIA, CID, SDLC...who has
the time for the older formats these days? Sometimes even SIA pisses me off.

"Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
news:E6GdnXMELN1FgenfRVn-1A@xxxxxxxxxxxxxx
> Well this will create a lot of work but you might try switching to 4/2
> reporting
>
> <shudder>
>
> "Anonymoose" <none@xxxxxxxxxxxxx> wrote in message
> news:2yPce.542$Q.487@xxxxxxxxxxxxxxxxxxxxxxxxx
> > This one is a v3.4SX per the sticker on the chip of the board.
> >
> > "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
> > news:5Oqdne55KsNdh-7fRVn-iA@xxxxxxxxxxxxxx
> > >
> > > "alarman" <alarman2000@xxxxxxxxx> wrote in message
> > > news:cACce.173$D91.55@xxxxxxxxxxxxx
> > >> A.J. wrote:
> > >> > Have you programmed your account number into both the main
> > >> > communicator as well as the partition ? Yes, each partition can
have
> > >> > their own account number, and you have to manually program in
> > >> > alarm/trouble/restore codes if you are using Contact ID.
> > >>
> > >> No you don't, if auto report contact ID is selected.
> > >> js
> > >
> > > Thats assuming the panel is capable of it, anything pre v3.3 won't do
> auto
> > > CID
> > >
> > >
> >
> >
>
>