Re: Dial out on 236i2

["Max 351" <aus_alarm_man_removespam@xxxxxxxxxxx>]

Check location 07 010000
location 7 position one can default back to 1 disabling dialler



"Max 351" <aus_alarm_man_removespam@xxxxxxxxxxx> wrote in message
news:jP9we.8654$oJ.1369@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Connect a phone to the line and dial a number like a mobile and make sure
> it rings, cancelled phone lines can still have a dial tone. If you only
> have a single pair phone line running to the alarm panel than that is
> wrong, if a phone is off the hook and the alarm panel attempts to dial, it
> will not take over the line and be able to dial out.
>
> "Rob" <rob_adel@xxxxxxxxx> wrote in message
> news:1119952749.616631.312920@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>I am unable to get my 236i2 to dial out.  The phone line is just a
>> single pair if I unplug it from the rj connector and plug it in to a
>> phone there is a dial tone.
>>
>> All panel options are pretty well default.
>>
>> Have set receiver #1 to be:
>>
>> 0A A04124#
>> 0B 38xxxE#
>> 0C 000000#
>>
>> Is there anything else that needs to be set or changed from standard to
>> enable this.
>>
>> Thanks Rob
>>
>
>