Re: Black and Decker 9105B

["Chuck" <cpmooney@xxxxxxx>]

I have a hard copy of the manual.

According to the manual, you can change the master code by unplugging the
controller and removing the battery.  Replace the battery and power.  Press
the programming button on the back and enter a new code.  Any combination of
1-2-3-4-5.
<nat2k5us@xxxxxxxxx> wrote in message
news:1122325438.211841.20790@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Hi
>
> I recently got this from a seller who made me think it was a couple of
> years old. Infact it looks like it is 15 years old. When I got the
> system to home and opened it it was missing the manual/installation
> instructions.
>
> If somebody has an idea or has the manual as to how to set this system
> up could you please send me the instructions, it will be greatly
> appriciated.
>
> I some how figured out that if I press the button at the back and then
> press 12345 then I can set the system mode in control panel. At the
> back of the main control unit and others(relay unit) there is a dial
> which can be used to set the security code. There are two dials with
> one dial having 0 to 10 settings and the second dial has 00 to 10
> marked on it. But the panel on the front has only 5 buttons marked 1 to
> 5. I am not able to figure out how to program this system.
>
> But once the system is set to ARMED I can't figure out how to turn it
> off by a code. The system has just five numbers 1,2,3,4 and 5. I can't
> figure out the security codes for this unit. If any one has an idea
> please help me. I want to be able to sent the monitoring to on / off
> atleast.
>
> Thank you.
>