Re: FBII XL-2 question

["Jim Rojas" <jrojas@xxxxxxxxxxxx>]

Open up the main control panel and check the wiring connections to the
siren. If the wiring seems to be intact, remove the siren wires and place it
across the battery. If the siren now works, check the bell fuse if it has
one. Fuses can be tested using a VOM meter for continuity. If the siren
fails to work, locate the siren and check the connections. You can  remove
the siren and then test it across the battery. If now works, then it is
likely that you may have a broken wire somewhere.

Good Luck

Jim Rojas


"Charles Schuler" <charleschuler@xxxxxxxxxxx> wrote in message
news:_MmdnTUdTv8jGyjeRVn-pw@xxxxxxxxxxxxxx
> The keypad arms the system (by entering the user code ... the arm light
> comes on) but no alarm sounds when the house is entered.  The strange
> thing is that "instant + stay + user code" works as expected..  This
> system was in the house when I moved here and no documentation is
> available.  The keypads are XL4600SMs.
>
> Thanks in advance!
>