Re: FBII XL-2 question

["Charles Schuler" <charleschuler@xxxxxxxxxxx>]

"Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
news:dQftf.855$7f7.582@xxxxxxxxxxx
> Open up the main control panel and check the wiring connections to the
> siren. If the wiring seems to be intact, remove the siren wires and place
> it across the battery. If the siren now works, check the bell fuse if it
> has one. Fuses can be tested using a VOM meter for continuity. If the
> siren fails to work, locate the siren and check the connections. You can
> remove the siren and then test it across the battery. If now works, then
> it is likely that you may have a broken wire somewhere.

Thanks Jim.  The sirens work (instant - stay mode).