Re: FBII XL-2 question

["Jim Rojas" <jrojas@xxxxxxxxxxxx>]

Then I suspect the zones may be programmed incorrectly, or your siren
timeout may be set to zero. I can remote download your system and take a
peek at the programming if you like.

Jim Rojas
(813) 884-6335 Cell



"Charles Schuler" <charleschuler@xxxxxxxxxxx> wrote in message
news:WZKdnTofg-KRESjeRVn-sw@xxxxxxxxxxxxxx
>
> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
> news:dQftf.855$7f7.582@xxxxxxxxxxx
>> Open up the main control panel and check the wiring connections to the
>> siren. If the wiring seems to be intact, remove the siren wires and place
>> it across the battery. If the siren now works, check the bell fuse if it
>> has one. Fuses can be tested using a VOM meter for continuity. If the
>> siren fails to work, locate the siren and check the connections. You can
>> remove the siren and then test it across the battery. If now works, then
>> it is likely that you may have a broken wire somewhere.
>
> Thanks Jim.  The sirens work (instant - stay mode).
>