Re: Radio Shack Safe House 49-450B Manual

["Jim" <abuse@xxxxxxxxxxx>]

Well I appreciate your 'second effort' Crash, don't know if that's the
keypad model but it's probably close enough.  It'll probably be about a week
before I'll be able to visit the church and try it out.

Thanks again,

Jim

"Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:c88Ne.43$Wf3.731@xxxxxxxxxxxxxxxxxx
> Sorry I forgot to add the link...and what a pain it was to find it again.
> http://support.radioshack.com/support_security/doc17/17355.htm
>
> And again...not sure if this is for the keypad you have either..
>
> hth
>
>
> "Jim" <abuse@xxxxxxxxxxx> wrote in message
> news:5q2Ne.144203$3j2.4702430@xxxxxxxxxxxxxxxxxxxxxxxxxxx
> >I don't see the sheet Crash?  The only programming it needs (I'm
guessing)
> > is setting up codes to turn the alarm on and off.
> >
> > Thanks,
> >
> > Jim
> >
> > "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
> > news:1mMMe.265$ZE2.469@xxxxxxxxxxxxxxxxxx
> >> here's a sheet for the 49-452 keypad... I can't remember if that was
the
> >> right one for thqt system or not...been a looonnnng time since I worked
> > for
> >> Radio Shaft.
> >>
> >>
> >> "Jim" <abuse@xxxxxxxxxxx> wrote in message
> >> news:n2KMe.134414$Kp2.13115459@xxxxxxxxxxxxxxxxxxxxxxxxxxx
> >> > My wife's church just replaced the batteries in their Radio Shack
Safe
> >> > House
> >> > 49-450B security system but they don't have the manual to reprogram
it.
> >> > The
> >> > RS Web site has all the technical details (specifications,
> >> > installation,
> >> > panel pictures, troubleshooting etc.) but no owner's manual for the
> >> > programming from the keypad.
> >> >
> >> > There are a couple of these items (or similar) on eBay but don't want
> >> > to
> >> > buy
> >> > one, just need to know how to program it, it was working fine before
> > their
> >> > power failure.
> >> >
> >> > I've searched the Web and newsgroups but haven't found any references
> > that
> >> > would point me to a good source.
> >> >
> >> > This particular newsgroup appears to support the professional
community
> >> > more
> >> > than the do-it-yourselfer so do apologize for the intrusion.
> >> >
> >> > Any info is appreciated, thanks.
> >> >
> >> > Jim
> >> >
> >> >
> >> >
> >>
> >>
> >
> >
>
>