Re: Radio Shack Safe House 49-450B Manual

["Russell Brill" <russwbrill@xxxxxxxxxxxxx>]

Heh heh, I asked a Rat Shack sales rep that question several years ago (I
had noticed a Radionics keypad mounted on the wall behind the counter)... He
just stood there with a big "?" above his head... Then I asked why Tandy
motion detectors weren't installed in the store, the "?" got bigger... The
guy went from being an electronics expert to electrically retarded in less
than 60 seconds :-))

"Jackcsg" <nospam@xxxxxxxxxx> wrote in message
news:YLadnQvu-69duZjeRVn-ow@xxxxxxxxxxxxxxx
> Wonder why Radio Shack doesn't put their own product in their own
> stores.....
> It's clearly better stuff than Radionic's.....
>
> "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:c88Ne.43$Wf3.731@xxxxxxxxxxxxxxxxxx
>> Sorry I forgot to add the link...and what a pain it was to find it again.
>> http://support.radioshack.com/support_security/doc17/17355.htm
>>
>> And again...not sure if this is for the keypad you have either..
>>
>> hth
>>
>>
>> "Jim" <abuse@xxxxxxxxxxx> wrote in message
>> news:5q2Ne.144203$3j2.4702430@xxxxxxxxxxxxxxxxxxxxxxxxxxx
>> >I don't see the sheet Crash?  The only programming it needs (I'm
> guessing)
>> > is setting up codes to turn the alarm on and off.
>> >
>> > Thanks,
>> >
>> > Jim
>> >
>> > "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
>> > news:1mMMe.265$ZE2.469@xxxxxxxxxxxxxxxxxx
>> >> here's a sheet for the 49-452 keypad... I can't remember if that was
> the
>> >> right one for thqt system or not...been a looonnnng time since I
>> >> worked
>> > for
>> >> Radio Shaft.
>> >>
>> >>
>> >> "Jim" <abuse@xxxxxxxxxxx> wrote in message
>> >> news:n2KMe.134414$Kp2.13115459@xxxxxxxxxxxxxxxxxxxxxxxxxxx
>> >> > My wife's church just replaced the batteries in their Radio Shack
> Safe
>> >> > House
>> >> > 49-450B security system but they don't have the manual to reprogram
> it.
>> >> > The
>> >> > RS Web site has all the technical details (specifications,
>> >> > installation,
>> >> > panel pictures, troubleshooting etc.) but no owner's manual for the
>> >> > programming from the keypad.
>> >> >
>> >> > There are a couple of these items (or similar) on eBay but don't
>> >> > want
>> >> > to
>> >> > buy
>> >> > one, just need to know how to program it, it was working fine before
>> > their
>> >> > power failure.
>> >> >
>> >> > I've searched the Web and newsgroups but haven't found any
>> >> > references
>> > that
>> >> > would point me to a good source.
>> >> >
>> >> > This particular newsgroup appears to support the professional
> community
>> >> > more
>> >> > than the do-it-yourselfer so do apologize for the intrusion.
>> >> >
>> >> > Any info is appreciated, thanks.
>> >> >
>> >> > Jim
>> >> >
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>