Re: Adding a third keypad to a Caddx NX-8, wiring help requested!

["Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx>]

I know...but I love to live dangerously! Pull the rods Fred!

Let's see in 20+ years and with  4000 residential alarms installed with an
average of 3 keypads per home...12,000 keypad runs, lets say 75 ft runs to
each 900,000 feet of solid wire run (lets subtract out the few that I did
run stranded) and round it out to 850,000 feet and never a problem with
solid keypad wires. I could also calculate device wiring runs as well :-)

I think the stranded v. solid issue is largely urban legend. If you wire the
system properly you'll have no problem with either...and there's pro's and
con's for each.




"Frank Olson" <feolson@xxxxxxxxxx> wrote in message
news:5EUMe.232679$5V4.206910@xxxxxxxxxxx
>
> "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:AqUMe.364$ZE2.1050@xxxxxxxxxxxxxxxxxx
>> is caddx sensitive to solid wire?
>
>
> Asking a question like this (in this group) is like pulling the control
> rods all the way out of a nuclear reactor after the "recirc" pumps have
> failed... ;-))
>