[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Adding a third keypad to a Caddx NX-8, wiring help requested!

Subject: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
From: "Frank Olson" <feolson@xxxxxxxxxx>
Date: Thu, 18 Aug 2005 05:02:57 GMT
Newsgroups: alt.security.alarms
References: <1124325989.739589.202500@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <DZRMe.22479$Rm3.14481@xxxxxxxxxxxxxxxxxxxxxx> <AqUMe.364$ZE2.1050@xxxxxxxxxxxxxxx>

"Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:AqUMe.364$ZE2.1050@xxxxxxxxxxxxxxxxxx
> is caddx sensitive to solid wire?


Asking a question like this (in this group) is like pulling the control rods
all the way out of a nuclear reactor after the "recirc" pumps have failed...
;-))

Follow-Ups:
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Crash Gordon

References:
- Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: brim
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: joe
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Crash Gordon

Prev by Message: Dodge Reports?
Next by Message: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
Previous by thread: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
Next by thread: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home