[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: casi rusco

Subject: Re: casi rusco
From: "Andrew Buchanan" <drewber@xxxxxxxxxxxx>
Date: Mon, 15 Aug 2005 21:29:00 -0400
Newsgroups: alt.security.alarms
References: <1123799569.129370.73060@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <1124000256.416537.221100@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <1124129836.148280.104940@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

Just so I know, what readers are you using?  I guess they're not Casi, as
casi prox readers will supervise the door devices when using an 8RP so all
you need to run is a 2pr/22.  Since your familiar with the software, you
probably know that already.

Andrew

"neil" <neilmiles@xxxxxxx> wrote in message
news:1124129836.148280.104940@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> thanks Sam,  the CK8RP is design for take over of Card Key access
> control system using the readers and twisted pair wire that runs from
> the Card Key controller to door modules. The CK8RP board has 8 reader
> ports and one 9 pin connector built on the board and this is for
> flashing the STI boards out in the field. In the Flashtool program
> under File theres a selection for flashing STI boards.The STI boards
> are  similar to the WIU-4 boards used to connect HID readers to the 8RP
> boards  thanks neil
>

Follow-Ups:
- Re: casi rusco
  - From: neil

References:
- casi rusco
  - From: neil
- Re: casi rusco
  - From: Silicon Sam
- Re: casi rusco
  - From: neil

Prev by Message: Re: An absurd situation
Next by Message: Re: compass question again
Previous by thread: Re: casi rusco
Next by thread: Re: casi rusco
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home