[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: casi rusco

Subject: Re: casi rusco
From: "neil" <neilmiles@xxxxxxx>
Date: 15 Aug 2005 11:17:16 -0700
Newsgroups: alt.security.alarms
References: <1123799569.129370.73060@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <1124000256.416537.221100@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

thanks Sam,  the CK8RP is design for take over of Card Key access
control system using the readers and twisted pair wire that runs from
the Card Key controller to door modules. The CK8RP board has 8 reader
ports and one 9 pin connector built on the board and this is for
flashing the STI boards out in the field. In the Flashtool program
under File theres a selection for flashing STI boards.The STI boards
are  similar to the WIU-4 boards used to connect HID readers to the 8RP
boards  thanks neil

Follow-Ups:
- Re: casi rusco
  - From: Andrew Buchanan

References:
- casi rusco
  - From: neil
- Re: casi rusco
  - From: Silicon Sam

Prev by Message: Help identifuing a wire
Next by Message: Re: rant: clients
Previous by thread: Re: casi rusco
Next by thread: Re: casi rusco
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home