casi rusco

["neil" <neilmiles@xxxxxxx>]

My company took over a account from a big security chain. One of the
building on this campus has a Micro 5 PX with 2 CK8RP and STI boards
installed. Part of the take over was that we upgrade the system to
Secure Perfect to 6.0.  After the upgrade the security office started
receiving hundreds of alarms from this building on all reader doors.
Two techs were sent out to go thru all inputs that are connected to the
STI boards. We could not find anything wrong accept poor installation
practise. Called GE tech support and the tech I spoke to told me since
we flashed the Micro with 3x app. code version 6.002 that we should
find out what firmware version the STI board are. The company I work
for order the 9 pin cable needed to connect to the CK8RP board. When I
connect laptop to the CK8RP using the Flashtool program, the program
could not see the STI boards. So I tried MCUTIL, this did'nt work. I
called GE tech support and the tech I spoke to was not really any help.
So I was wondering If any body out there that has work with these
boards could give me some help.  Thanks neil