Re: Concord Express

["Russell Brill" <russwbrill@xxxxxxxxxxxxx>]

"Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
news:EaKdnSuj4oa3DGzfRVn-rg@xxxxxxxxxxxxxx
>
> "WhoCares" <beer@xxxxxxx> wrote in message
> news:11f1icf71t1te4a@xxxxxxxxxxxxxxxxxxxxx
>> There is a reset jumper (the pins may not actually soldered in, but the
>> pads are on the circuit board)...Power down the system (remove both AC
>> power and battery), short across this jumper, power the system up, and
>> it should bring you back to the factory config....
>
> Unless the dealer code has been programmed then your screwed
>
>> Then you will need the 2 line display LCD or VFD keypad attached to it
>> (the "fixed" display keypads don't work for programming)....press "8" to
>> enter programming "4321" for the installer password then "00" to enter
>> installer programming.....
>
>> The programming is menu driven...use the "A" and "B" keys on the keypad
>> to scroll through the menus....
>> The installer manual is available at www.itii.com ... You simply need to
>> do a free registrastion as a security professional...
>>
>> The Conord Express is a very good system...You're basicly getting 8 free
>> wireless zone (for use with keychain transmitters, or for sensors in
>> hard to reach places..)
>
> Wait till you see the Concord Express v4, awsome panel compared to the old
> Express
>
>
What goodies did the boys & girls at GE add to the panel???

Russ......