Re: Concord Express

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

"WhoCares" <beer@xxxxxxx> wrote in message
news:11f1icf71t1te4a@xxxxxxxxxxxxxxxxxxxxx
> There is a reset jumper (the pins may not actually soldered in, but the
> pads are on the circuit board)...Power down the system (remove both AC
> power and battery), short across this jumper, power the system up, and
> it should bring you back to the factory config....

Unless the dealer code has been programmed then your screwed

> Then you will need the 2 line display LCD or VFD keypad attached to it
> (the "fixed" display keypads don't work for programming)....press "8" to
> enter programming "4321" for the installer password then "00" to enter
> installer programming.....

> The programming is menu driven...use the "A" and "B" keys on the keypad
> to scroll through the menus....
> The installer manual is available at www.itii.com ... You simply need to
> do a free registrastion as a security professional...
>
> The Conord Express is a very good system...You're basicly getting 8 free
> wireless zone (for use with keychain transmitters, or for sensors in
> hard to reach places..)

Wait till you see the Concord Express v4, awsome panel compared to the old
Express