[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: xpl streamin SlimServer
- Subject: Re: xpl streamin SlimServer
- From: "rleong1" <rleong1@xxxxxxxxx>
- Date: Mon, 05 Sep 2005 14:05:03 -0000
--- In ukha_xpl@xxxxxxx, "wudl10" <wudl10@y...> wrote:
> --- In ukha_xpl@xxxxxxx, John Gorst <ukha@g...> wrote:
> > John B wrote:
> >
> > >>) I want to control Slimserver via xPL. I am using my
> > >>Application (built in Labview 7.1) ans SlimServer on the
same
> > >>Machine. I send several commands to the UDP Port 3865
> > >>(localhost), but nothing happens. My commands look like
this:
> > >>
> > >>xpl-cmnd
> > >>{
> > >>hop=1
> > >>source=mysource
> > >>target=*
> > >>}
> > >>audio.basic
> > >>{
> > >>command=stop
> > >>}
> > >>
> > >>What is wrong. I tried alot of commands and various
> combinations.
> > >>Please help
> > >>
> > >>
> > >
> > >Have you enabled xPL support within the SlimServer web
interface?
> > >(It used to be under Server Settings -> Advanced ->
Network, but
> that
> > >was in the days of SlimServer v5.1 - it may have moved since
then)
> > >
> > >
> > It is still in the same place in 6.1
> > Make sure that you have a XPL hub running as well.
>
>
> Hi thanks for your replies.
>
> But it sitll does not work. I have enabled the xpl Interface. And I
> tried it also with a xpl Hub. But actually it schould work also
> without hub. Because I am sending the xpl Commands direct to the udp
> port of Slimserver. Maybe my commands that I send are wrong? What
> can I do to find out what is wrong with my application. I already
> instalelled a ethernet monitor to see if the udp telegrams go out
> and they do.
>
> Thank you for your help
>
> wudl 10
did you restart the slimserver service after enabling xpl?
rather than target everything:
target=*
try the specific slim device:
target=slimdev-slimserv.xyz
xPL Main Index |
xPL Thread Index |
xPL Home |
Archives Home
|