Re: CCTV

["c8les" <aaron@xxxxxxxxxxxxx>]

Thanks Brian,

I would like the cameras to be accessible from the web (including=20
control of the PTZ remotely).

Thanks for the information regarding 'presets'. was there any way=20
around the problem, or does it mean a different type of camera?

As the cameras I'm looking at are dome type, I need to install some=20
additional IR. I've seen some RAYTEK units which look the part. Any=20
experiance??

regards, Aaron

--- In ukha_d@xxxxxxx, "ReynoldsB"
<brian.g.reynolds@...>=20
wrote:
>
> Hi Aaron, not sure if you got a reply for your questions?
>=20
>=20=20
>=20
> I use Geovision with 12 cameras (iirc, it is in storage as my=20
house is being
> sold!)
>=20
>=20=20
>=20
> I bought a lovely PTZ camera and tried to set pre-sets until I=20
eventually
> found out you need a very expensive camera to do this! At =A3800 I=20
thought I
> had!!! It appears Geovision is capable of this but you need a=20
camera that
> can also do this! I was not told this when buying the camera=85=85
>=20
>=20=20
>=20
> Geovision is a very good system, loads it can do but maybe=20
overkill for a
> small office? It has a good web interface that can control PTZ=20
cameras as
> well as the usual stuff.
>=20
>=20=20
>=20
> IP cameras seem a good bet nowadays but not too sure of the=20
recording side
> of things?
>=20
>=20=20
>=20
> B.
>=20
>=20=20
>=20
>   _____=20=20
>=20
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On=20
Behalf Of
> c8les
> Sent: 25 January 2008 20:09
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] CCTV
>=20
>=20=20
>=20
> Hi all,
>=20
> I currently looking at installing some CCTV at my small office and=20
was=20
> looking for some advice?
>=20
> I've been looking at GeoVision, If anyone can comment, suggest=20
> anything, experiance(s), it would be much appreciated.
>=20
> I've been looking at the Geovision DVR system, with Pan Tilt and=20
Zoom=20
> Cameras.
>=20
> Can the cameras continuously PTZ a specfied area?
> Also, can the cameras be controlled from a PC?
>=20
> regards, Aaron=20
>=20
>=20
>=20
> [Non-text portions of this message have been removed]
>