The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Any Slingbox Owners?



To follow up, if anyone is interested.

>From Sling:

"Thank you for contacting Sling Media support.

If the network light and the red "N" are both flashing
continuously the
Slingbox is stuck in the reset cycle due to either a hard or firmware
problem.

You can call our helpdesk so we can troubleshoot your issue and log all
needed details if to issue a replacement if applicable. Our technical
support line is available Monday - Friday 09:00 AM to 08:00 PM GMT @
0207 294 0157."

I phoned and they said, after trying a 20 seconds reset, its broke!
They are sending me a replacement, free of charge, as long as I return
the old faulty box within 30 days.

Can't say fairer than that!

On Jan 27, 2008 9:48 AM, David Brown <daveb81@xxxxxxx> wrote:
> Hi all
>
> Ben, did you get your slingbox working again? I have just noticed mine
> has died!! I haven't used it for a few weeks and when I went to
> connect, it wouldn't. When I got home I found the network light and
> sling 'n' were flashing. Its not connecting to the router. Tried a
> different cable and port on the router with no change. Also tried a
> factory reset but the box doesn't behave as the instructions say it
> should. After five seconds the network light stops flashing for a few
> seconds then comes back on, flashing at the same rate as before.
> Router and internet are all working fine.
>
> I guess the next step is to get hold of Sling?
>
>
> On Jan 20, 2008 1:21 PM, Ben McCormack <yahoogroup@xxxxxxx>
wrote:
>
> > Guys
> >
> > I have what appears to be a stupid problem with my Slingbox.
> >
> > Couple of days ago it stopped working (flashing lights on the
front).
> > I have just looked at how to perform a factory reset and I have
to
> > press the reset button at the back of the unit. Should be easy.
> >
> > I have the reset button (appears to be blue) but it will not
'push'
> > in, no movement from it. To be honest it appears as if there is a
> > blanking piece in there is similar.
> >
> > Anyone had this issue? or any ideas?
> >
> > Ben
> >
> >
> > **** Sponsored By http://www.Berble.com ****
> > ****       Computers You Carry          ****
> >
> >
> >
> >
> >
> >
> >
>



UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.