The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Wanted: Xantech IR Distribution equipment/receivers/emittors/splitters/psu!


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Comfort sending RS232 commands - any success ?



But if Comfort and the plasma are both DCE serial ports (I'm sure this is
the way it works) then you'll need to use a null modem cable to connect two
"like" ports together...

You usually use a straight through cable when you're connecting a DTE and
DCE port together...

Phil

> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
> Gareth Cook
> Sent: 28 January 2007 22:45
> To: ukha_d@xxxxxxx
> Subject: Fw: [ukha_d] Comfort sending RS232 commands - any success ?
>
> I had been using a straight serial cable to connect the pc to the
plasma
> to test.
>
> I'll see if i can trap the commands via hyperterminal
>
> G.
>
>  Gareth Cook
>  IT Architect / Project Manager, SWG Sales
>  IBM SWG Sales - Lotus Park, Staines, TW18 3AG
>  Office: +44 (0)1784 445166 - Mobile: +44 (0)7980 445166
>  email: g@xxxxxxx
>
>
> ----- Forwarded by Gareth Cook/UK/IBM on 28/01/2007 22:30 -----
>
> Discussion
> Main Topic
>
> ukha_d@xxxxxxx
> Today 20:53
>
> .
> Subject:
> .
> Re: [ukha_d] Comfort sending RS232 commands - any success ?
> .
> Category:
>
>
>
> Hi Gareth
>
> Have you tried swapping pins 2 + 3  (tx and rx) ...???
>
> HTH
> Frank
>
> ----- Original Message -----
> From: "Gareth Cook" <g@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Monday, January 29, 2007 7:14 AM
> Subject: [ukha_d] Comfort sending RS232 commands - any success ?
>
>
> > Guys
> >
> > Im trying to get a Comfort UCM to send some commands to the
plasma
> screen
> > - 02H then POF then 03H
> >
> > I can plug the cable in the pc and talk to the ucm ok, and i can
plug
> the
> > cable from the pc to the plasma ok - i found a program to send
these
> > commands for me (i didnt have much success sending them manually)
> >
> > So assuming the serial cable is all ok to the plasma from the
ucm,
> > something is going wrong ! Type of thing that drives you nuts !
> >
> > ?
> >
> > Ta
> >
> > G.
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.